C61 (2) series horizontal Center lathe is suitable for turning inner and outer cylindrical surface, conical surface and other rotating surfaces, turning various metric, imperial, modular and diameter joint threads, and can be used for drilling and drawing grooves. C61 (2) series horizontal center lathe is a very universal horizontal lathe, which is widely used in batch processing of various shaft and disk parts.
Production Information
PRODUCT PARAMETERS
| Model | CA6140 | CA6150 | CA6161 | CA6166 | CA6180 | |
|---|---|---|---|---|---|---|
| CA6240 | CA6250 | CA6261 | CA6266 | CA6280 | ||
| Max .Swing over bed | 400mm | 500mm | 610mm | 660mm | 800mm | |
| Max .Swing over carriage | 210mm | 300mm | 370mm | 400mm | 540mm | |
| Max .Swing in gap (CA62 Series) | 630mm | 720mm | 830mm | 880mm | 1020mm | |
| Effective gap length (CA62 Series) | 210mm | 210mm | 210mm | 210mm | 210mm | |
| Max .length of work piece | 750/1000/1500/2000/3000mm | |||||
| Width of bed | 400mm | |||||
| Section of turning tool | 25×25mm | |||||
| Spindle | Spindle speed | 10-1400rpm/16-1400rpm(24steps) | ||||
| Hole through spindle | A: 52mm ; (B: 80mm); [C: 105mm] | |||||
| Spindle taper | (MT6); (Φ90 1:20); [Φ113:20] | |||||
| Feed | No. of feed | (64 kinds)(for each) | ||||
| Range of metric threads | (1-192mm) (44 kinds) | |||||
| Range of inch threads | (1-24tpi) (21kinds) | |||||
| Range of module threads | 0.25-48 (module 39 kinds) | |||||
| Range of diametral pitc threads | 1-96DP (37 kinds) | |||||
| Tailstock | Max. tailstock spindle travel | 150mm | ||||
| Tailstock spindle diameter | 75mm | |||||
| Taper of tailstock spindle | (MT5) | |||||
| Main motor | 7.5KW(10HP) | |||||
| Packing size(L×W×H mm) | 2550/2700/3200/3700/4850×1140×1750 | |||||